GMW3399M-ST-S CR590T/340Y-DP HD60G60GU
GMW3399M-ST-S CR590T/340Y-DP HD60G60GU is a material designation under GM GMW. Ferrite-martensite microstructure: high strength with good formability, used for structural and crash parts. Supplied hot-dip galvanised.
Specification
| Standard | GM GMW |
| Material family | Dual phase (DP) |
| Coating | Hot-dip galvanised · 60/60 g/m² (both sides) |
| Strength | ≈ 590 MPa minimum yield (per designation) |
| Supply form | Coil · slit strip · cut-to-length sheet |
| Thickness | Per production specification |
| Width | Per production specification |
Equivalent grades
Buyers usually ask for this designation alongside one of the following. They are close, not identical — always confirm against the standard on your drawing.
- EN 10130 DC06
- JIS G3141 SPCG
Quoting this grade
Send us the designation together with thickness, width, coating mass and annual volume. We reply with the mill source and a price, normally within one working day.
Request a quote for GMW3399M-ST-S CR590T/340Y-DP HD60G60GU